Fiso Technologies

EasyGrid Fibre Optic Temperature Measurement System

The EasyGrid Fibre Optic Signal Conditioner is designed for direct, accurate and real-time Hot Spot Temperature Monitoring in Distribution or Power Transformers in Utility application and to manage and maximize your transformer performance.The EasyGrid provides critical information about the level of thermal stress and the management of the life cycle of any transformer or reactor. From an EHV/UHV, HVDC to a distribution transformer the cost-effective EasyGrid will meet the highest requirements. A large 7″ (800 x 480) Color Touch Screen LCD Display allows you to monitor and configure up to 18 channels and 16 form-C programmable relays. The graphical
user interface makes it easy to customize to your needs.

  • 6-18 Channels
  • Large 7″ Colour Display
  • -40 °C to 225 °C
  • Accuracy: ±1°C
  • USB,RS-485 & RJ45
  • Analogue Outputs
  • Relay Control or Alarm
  • Data Logging

back to top

EasyGrid LT Fibre Optic Temperature Measurement System

The EGD-LT was designed to respond to the industry’s need for improved live loading efficiency and transformer life management. It complements the already highly successful EasyGrid, maintaining the EasyGrid’s principal features and ergonomics on a much smaller footprint. Cost-effective and flexible, the EGD-LT will allow direct, accurate, and real-time temperature monitoring of power transformers, thus maximizing their performance. The EGD-LT is best-suited for smaller transformers, and performs simultaneous temperature measurements on up to 8 hot-spots. Moreover, it boasts a flexible design for maximum customisable options to match operation requirements of each client’s applications.

  • 2 to 8 Channels
  • -40 °C to 225 °C
  • Accuracy: ±1°C
  • USB,RS-485 & RJ45
  • Analogue Outputs
  • Relay Control or Alarm
  • Data Logging

back to top

UMI Fibre Optic Data Acquisition System

The UMI Signal Conditioner is designed to perform accurate multi-channel temperature, pressure, strain, refractive index, and displacement measurements. Thanks to its unique, patented technology, the UMI conditioner is capable of measuring the absolute cavity length of FISO’s Fabry-Perot fibre optic sensors with astonishing accuracy, providing highly accurate and reliable measurements. The UMI has a 0.01% full-scale resolution and a 0.025% full-scale precision.

  • 4 or 8 Channels
  • Temperature Measurement
  • Pressure Measurement
  • 20Hz Sampling
  • +/-5V Analogue Outputs
  • USB Interface

back to top

Evolution Fibre Optic Data Acquisition System

The Evolution Series of Signal Conditioners are designed for High Resolution or High Speed measurement of Temperature and Pressure at up to 15KHz Sampling Rate. Designed for applications where radiation of RF and Microwaves or EMI are present, the Fiso Evolution Series Fibre Optic Data Acquisition System is ready to acquire data in the harshest of environments.

  • Temperature Measurement
  • Pressure Measurement
  • 250Hz or 15KHz Sampling
  • USB Interface

back to top